jumpmen00

Sliding Patio Doors Repairs Your sliding patio doors will bring in natural light to your home, and will increase the efficiency of your home's energy usage. In time, they might start to show signs that suggest some attention. Luckily, the majority of problems with sliding patio doors are simple to fix. Find out how to keep your sliding patio doors looking and functioning like new. Tracks that are damaged or dirty Tracks One of the most common reasons for sliding patio doors that do not open is clogged or dirty tracks. Over time, the grit and grime from daily use build up on the track and can cause the door to jam or even break down completely. A regular cleaning of sliding doors and their tracks in your household chores can help minimize this accumulation. Start by sweeping or vacuuming large debris off the tracks. Then apply warm water and non-abrasive cleansing products such as dish soap to clean them. Adding related resource site of vinegar to your cleaning product can also help remove stubborn grease and dirt stains. If you find that your sliding door doesn't move smoothly after following these steps, it may be the sign of more severe damage that requires professional repair or replacement. There are a few simple fixes you can make before calling in professionals to avoid costly repairs or replacements. It is essential to put a doormat on the bottom of your sliding doors in order to keep dirt out before it has the chance to reach the tracks. You should also regularly cut any bushes or plants close to your sliding doors in order to limit the amount of debris that gets tracked into the tracks. Close the door correctly to prevent damage to the rollers and wheels. You can prolong the life of your doors by maintaining them clean and lubricated. Misaligned Rollers Sometimes the sliding patio door may become misaligned or gets stuck. Most often, this is due to obstructions or dirt that can be easily removed. But sometimes it can be due to a bent track or roller. In this case you can straighten the rollers by removing them by using the adjustment screws and cleaning with rubbing alcohol. Be cautious because these parts can be delicate. If your doors are still sticking, you can lubricate the rollers. This will lessen friction and allow them to move more easily. It is recommended to apply a silicone-based lubricant because petroleum-based lubricants can draw dirt more quickly. It is important to clean the tracks and rollers before applying lubricant. Once you've cleaned the rollers, you are able to reinstall them with the adjustment screws. It is recommended to apply the same lubricant that you used for cleaning them. Be sure to push the rollers fully into their channels when you reinstall them. You can now test your door and see if it slides smoothly. If the problem persists it is possible to remove the door and check the rollers and tracks. If the rollers or tracks are bent badly, they may need to be replaced. In this case, it's a good idea to contact a professional for the installation. Warped Glass Sliding glass doors are excellent for bringing outside into your home and letting in natural sunlight, but they may also be vulnerable to damage that requires repair or replacement. Cracks, warping, and fading are some of the most common problems. Warping occurs when the materials that comprise your sliding glass patio door begin to degrade due to heat, sun and other environmental factors. The most common cause of cracking is injuries caused by impact, like from a lawn mower or ball run-in, while fading usually is caused by repeated contact with sunlight and other natural elements. If your sliding glass patio doors are difficult to close or open it could be a sign that the tracks and rollers are not functioning correctly. This problem may be caused by the accumulation of dirt or rust in the wheels or track or a lack or lubrication. Cleaning the tracks and rollers by removing obstructions, and then applying silicone spray may help solve this issue. The locking mechanism may be faulty which makes it difficult to open and shut your sliding patio doors. It could be due to misalignment, wear and tear, or an amalgamation of both. To fix this issue, simply adjust the locking mechanism by turning the adjustable screws on the bottom. Drafts or air leaks that surround your sliding patio door are a typical problem that can reduce the efficiency of your home's energy usage. These problems are usually caused by weather stripping that is worn out or poor alignment of the door. This can be fixed easily by replacing the weather stripping and realigning your doors. Loose Handle It can be frustrating when the handle of a sliding door becomes loose. It makes it difficult to open. This problem is caused by an improperly aligned lock mechanism. It can be fixed by loosening and tightening the screws holding it in the correct position. A loose handle may result from the handle separating from the spindle connecting it to the interior or exterior handles. This is typically the result of a combination of factors, including excessive use wear and tear or simply the general aging. If the issue isn't addressed quickly, it could eventually result in the whole handle becoming loose and possibly falling off completely. To resolve this issue, you should first locate the screws that connect the interior and exterior handles. The screws are typically hidden behind plastic tabs which can be removed using a flathead (or a Phillips head screwdriver in certain cases) screwdriver. It's a good idea store these screws somewhere safe so that you don't loose them. After the handles have been removed the next step is to remove the spindle that has become loose. This can be accomplished by tapping on the end with a mallet or hammer until it is free of its place inside the door. Then, the new handle can be put in place by simply placing the spindle into the hole on the interior handle and then placing the other end of the spindle into the hole in the outside handle. Once the handle is in place it can be tightened by screwing the screws back into place and then testing to ensure that the lock and unlock mechanisms work correctly. Poor weatherstripping A damaged or cracked weatherstripping can allow air and water to seep through your patio doors, compromising the comfort and energy efficiency of your home. It could let in moisture and create drafts, which can increase your heating and cooling costs. It's simple to replace defective weatherstripping, even without the assistance of a professional. The first step is to remove the old stripping by either loosing its staples with the help of a screwdriver or by pinning it gently with the help of a putty knife before taking it away from the door. Then, you can wash the area and apply a new layer of weatherstripping that is backed by a foam seal that helps stop leaks and improve the comfort. If your sliding patio door isn't working as it should, you need to fix the issue as soon as possible to avoid further damage and to keep them functioning for years to be. Depending on how severe the issue is, a DIY solution or a professional repair/replacement could be the best option. Most problems with sliding patio doors are caused by dirty rollers, faulty tracks, and an untidy handle. In the majority of instances these issues can be fixed with regular maintenance and cleaning, such as fluidizing the track as well as adjusting the rollers and tightening hardware. However, if these measures aren't working, it's best to seek professional advice to make sure that your patio door is working as it should. Check the warranty information before you decide to repair or replace your patio door. This will save you money in the future for repairs and replacements.